Search

Posts Tagged ‘Vertical’

Machine Shop Tips #44 Part 5 Vertical Bandsaw tubalcain


Part 5 of 6. Tubalcain demonstrates the use & care of the vertical bandsaw.

Be the first to comment - What do you think?  Posted by - February 24, 2013 at 9:34 pm

Categories: Vintage Steam Engines   Tags: , , , , , ,

Machine Shop Tips #43 Part 4 Vertical Bandsaw tubalcain


Part 4 of 6. Tubalcain demonstrates the use & care of the vertical bandsaw.

Be the first to comment - What do you think?  Posted by - January 17, 2013 at 9:33 pm

Categories: Vintage Steam Engines   Tags: , , , , , ,

Stuart vertical boiler and stationary steam mill engine


This is my Stuart veritcal boiler and my stationary steam engine running at 30 PSI. The boiler isn’t firing from coal, it’s being fired by a custom made blow torch, or in other words a flattened copper tube with holes punched into it then connected to a gas bottle.

Be the first to comment - What do you think?  Posted by - May 7, 2012 at 10:40 pm

Categories: Vintage Steam Engines   Tags: , , , , , ,

Live Steam Vertical Factory Steam Engine


This is the type of steam engine and boiler that you might find in a factory that would run overhead lineshafts that would power lathes,drills,saw and most other machines in the shop. The dimensions are as follows 61″ to the top of the stack the boiler is 10’dia. x 28″ tall. The flywheel is 8″ dia. x 1 1/2″ wide. The engine boiler weigh about 300 lbs The bore is 1 3/4″ and the stroke is 2″. It runs smooth on very little steam or air.

2 comments - What do you think?  Posted by - November 21, 2011 at 9:36 pm

Categories: Vintage Steam Engines   Tags: , , , ,

How I Built My Model Vertical Steam Engine


See it running here: www.youtube.com Ignot is spelled ingot! Photo story on the process of building a self designed model steam steam engine. This is the 2nd engine I built. How the valve works is located here: www.neatstuff.net

25 comments - What do you think?  Posted by - March 31, 2011 at 11:09 pm

Categories: Vintage Steam Engines   Tags: , , , ,

Model Vertical Steam Engine Assembly Kit

  • Operating model of a vertical steam engine
  • All parts are fully-machined
  • You assemble the model

Product Description
This is a working horizontal steam engine. The completed model is 5.5″ long, 4.75″ wide, and 6″ tall. The base is 7″ long 7″ wide. This kit includes the wooden base. These assembly kits are not strictly bolt-together kits. Some parts press together (an arbor press is the correct tool, but with care you can use a vise). Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air…. More >>

Model Vertical Steam Engine Assembly Kit

Be the first to comment - What do you think?  Posted by - October 24, 2010 at 10:53 pm

Categories: Vintage Steam Engines   Tags: , , , ,

Heron Vertical Steam Launch Plant


Heron Vertical Steam Plant

9 comments - What do you think?  Posted by - March 23, 2010 at 10:34 pm

Categories: Vintage Steam Toys   Tags: , , , ,